Home

GLASS TORCH TECHNOLOGIES INC.

Phone: 570-835-9777

gtt@glasstorchtech.com

Home Torches Accessories Servicing Contact Us Videos & FAQ

Please CLICK HERE for ordering information

Glass Torch Technologies, Inc. 2015

Terms of Use      Privacy Policy

REGULAR TURBO SWITCH

$410.00

The electric Turbo Switch uses solenoids that turn the outer fire on and off.  This allows the pedal switch to be on the floor and the control box mounted under the bench.  This arrangement can keep the hoses out of the way of the user.  This pedal is designed for rapid on/off operation.  If long periods of outer fire operation are needed the manual Rock-It is a better option as the solenoids heat up with long periods of use.  

The Turbo Switch comes standard with barbed ends, or you can request "B" fittings for an additional charge. The GTT staff has the experience to recommend a torch and foot pedal setup that will fit your needs.  We have assembled many torch and foot pedal combinations that are “ready to run” right out of the box.   Torch and pedal setups are available with different lengths of hose to accommodate different bench heights or lathe configurations.  Setups can include supply hose and regulators or existing supply hose can easily be used with the torch and pedal setup.

TURBO SWITCH WITH

OXYGEN BYPASS

$460.00

The oxygen bypass allows the user to meter some oxygen through the outer fire of the torch to enhance the center fire flame.  This creates a more oxygen rich environment to run the center fire flame bigger and cleaner before turning on the outer fire flame.  The oxygen rich environment is also necessary for some effects in certain types of specialty glass.  The oxygen bypass comes with a valve to meter the amount of oxygen or turn it off completely when not needed.

The electric Turbo Switch uses solenoids that turn the outer fire on and off.  This allows the pedal switch to be on the floor and the control box mounted under the bench.  This arrangement can keep the hoses out of the way of the user.  This pedal is designed for rapid on/off operation.  If long periods of outer fire operation are needed the manual Rock-It is a better option as the solenoids heat up with long periods of use.  

The Turbo Switch comes standard with barbed ends, or you can request "B" fittings for an additional charge. The GTT staff has the experience to recommend a torch and foot pedal setup that will fit your needs.  We have assembled many torch and foot pedal combinations that are “ready to run” right out of the box.   Torch and pedal setups are available with different lengths of hose to accommodate different bench heights or lathe configurations.  Setups can include supply hose and regulators or existing supply hose can easily be used with the torch and pedal setup.